Tata Cara Sholat Gerhana

Cc6os9XUMAAbLuE

1. NIAT

Niat shalat sunnah Gerhana Bulan:

أُصَلِّيْ سُنَّةَ لِخُسُوْفِ الْقَمَرِ رَكْعَتَيْنِ لِلَّهِ تَعَالَى

(” Ushallii Sunnatal Khusuufil-Qomari Rak’ataini Lillahi Ta’alaa “)

Artinya : ”Saya niat (melaksanakan) shalat sunnah Gerhana Bulan dua rakaat karena Allah ta’ala “

 

Niat sholat sunnah Gerhana Matahari

أُصَلِّيْ سُنَّةَ لِكُسُوْفِ الشَّمسِ رَكْعَتَيْنِ لِلَّهِ تَعَالَى

(” Ushallii Sunnatal Kusuufis-Syamsi Rak’ataini Lillahi Ta’alaa “)

Artinya : ”Saya niat (melaksanakan) shalat sunnah Gerhana Matahari dua rakaat karena Allah ta’ala “

Continue reading

2014 in review

The WordPress.com stats helper monkeys prepared a 2014 annual report for this blog.

Here’s an excerpt:

The concert hall at the Sydney Opera House holds 2,700 people. This blog was viewed about 55,000 times in 2014. If it were a concert at Sydney Opera House, it would take about 20 sold-out performances for that many people to see it.

Click here to see the complete report.

How to enable 3g-modem on FortiGate

1. How to enable 3g-modem:
#config system modem
set status enable
set phone1 *99#
set extra-init1 “at+cgdcont=1,\”IP\”,\”broadband.windmobile.ca\””
end

2. If modem ID needs to be added:
#fnsysctl cat /proc/bus/usb/devices        —– get the USB device ID

3. Sample configuration for custom 3g-modem:
#config system 3g-modem custom
set vendor “My Phone Company”
set model “my phone model”
set vendor-id “ff55″
set product-is “88aa”
end

4. How to enable 4G/LTE:
#config system global
set usb-lte enable
end

5. Tools for Troubleshooting:
#diagnose sys modem detect wireless
#diagnose sys modem external-modem

 

How to repairing database on FortiMail

Run this command using CLI:

1. Collect result from the commands:
# diagnose debug sqldb-error read
# diagnose debug crashlog read

2. Back up the current log to an external FTP server:
# execute backup disk alllogs ftp x.x.x.x <username> <password>

3. Run the following command to recreate the SQL database:
#execute log recreate-sqldb

4. If the symptom persists, then proceed with following command to format the log disk:
# execute formatlogdisk

 

2013 in review

The WordPress.com stats helper monkeys prepared a 2013 annual report for this blog.

Here’s an excerpt:

The concert hall at the Sydney Opera House holds 2,700 people. This blog was viewed about 54,000 times in 2013. If it were a concert at Sydney Opera House, it would take about 20 sold-out performances for that many people to see it.

Click here to see the complete report.

How to avoid FortiGate entering conserve mode

threat_landscape“The system has entered conserve mode”

“Fortigate has reached connection limit for n seconds”

That is status field from the “Alert message control”  on System Dashboard. that status indicates the critical level from FortiGate device if it has entered conserve mode.

This problem happens when shared memory goes over 80%, to exit this conserve mode you have to wait (or kill some of the processes) until the memory goes under 70%. A FortiGate goes into the conserve mode state as a self protection measure when a memory shortage appears on the system. When entering conserve mode the FortiGate activates protection measures in order to recover memory space. When enough memory is recovered, the system is leaving/exiting the conserve mode state and releases the protection measures.

Antivirus fail-open is a safeguard feature that determines the behavior of the FortiGate AntiVirus system, when it becomes overloaded with high traffic.

to mitigate this you have more type of options: Continue reading

Our Wedding

 

heading Continue reading

Follow

Get every new post delivered to your Inbox.

%d bloggers like this: